Schedule a FREE home water test with a Culligan Water expert today!

PCBs in Escondido Water

PCBs, or Polychlorinated Biphenyls, are chemicals that were developed and used in machinery and industrial production. They were also commonly used as additives in coolants as well as electrical insulators and components of various electronics from refrigerators to TVs. In the later part of the 1970s, scientists began to understand the potentially damaging effects of PCBs, since they can remain in the environment for long periods of time.

Though their use was banned in the United States in 1979, because of their chemical composition they are still widespread. PCBs can even be found in remote parts of the world. 

What are PCBs in Water?


PCBs in water are more common in areas where industrial production has, or currently, takes place. Discharge and runoff from industrial, and even some kinds of agricultural facilities, can enter drinking water supplies and cause elevated levels. PCBs in water can be hard to identify because they are often odorless, which makes them unassuming water contaminants.

In general, PCBs don’t dissolve well in water, so often contamination from PCBs in humans comes from foods that we eat – like fish who have absorbed the water – or other environmental exposure. Public water systems are still required to monitor for them.

How PCBs Are Regulated


PCBs are regulated in public drinking water. The EPA’s enforceable limit (MCL) is 0.5 parts per billion (ppb), and California applies the same 0.5 ppb limit. California’s Public Health Goal for PCBs, set by the Office of Environmental Health Hazard Assessment (OEHHA), is 0.09 ppb; a Public Health Goal is a non-enforceable target. Your utility reports PCB results, where detected, in its annual Consumer Confidence Report, and a test of your own tap is how you find out what is reaching your fixtures. If you have health questions, talk to your doctor or your county health department.

How to Reduce PCBs in Water


Activated carbon filtration and reverse osmosis are the methods typically used to reduce PCBs in drinking water; check a system’s performance data sheet for what it is certified to reduce. If you suspect you have PCB water contamination, the first step is a certified laboratory test, since PCBs aren’t part of a standard in-home water test. Your local Culligan Man can then help you determine the best course of filtration. For example, if PCB water contamination occurs at a place of business, it may be effective to install a point-of-use filter to reduce PCBs. If it occurs at the home, point-of-entry filtration systems will likely be more desirable to treat the water at every tap in the home.

If you have any other questions about PCBs in your drinking water or want to learn more about how Culligan of Escondido can help, schedule a free water test today!

Comments

You must be logged in to post a comment.